Mazda MX-6 1998, Workshop Manual, Page: 980 / 1282

SEAT BELT
REAR SEAT BELT REMOVAL/INSTALLATION
Caution
•
Do not disassemble the retractor. The
emergency locking retractor (ELR) has a
spring that will unwind if the retractor is
disassembled. The spring cannot be
rewound by hand. If this occurs, the ELR
will not work properly.
1. Remove the C-pillar trim. (Refer to 09-17
C-PILLAR TRIM REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
W 6 U 8 1 1 W 0 2
3 9 — 7 8 { 3.9 — 8 . 0 , 2 9 — 57}
N m {k g f-m , f t l b f }
W 6 U 8 1 1 W A 1
Bolt
Rear seat belt
REAR CENTER SEAT BELT REMOVAL/INSTALLATION
Caution
•
Do not disassemble the retractor. The
emergency locking retractor (ELR) has a
spring that will unwind if the retractor is
disassembled. The spring cannot be
rewound by hand. If this occurs, the ELR
will not work properly.
1. Remove the rear package trim. (Refer to 09-17
REAR PACKAGE TRIM
REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
39— 78 N m
{3.9— 8.0 kgf-m,
29— 57 ftlb f }
S
W 6 U 8 1 1 W 0 3
W 6 U 8 1 1 W A 2
1 Bolt
2
Fastener
3 Rear center seat belt
0 8 -1 1 -2