Mazda MX-6 1998, Workshop Manual

Page: 1198 / 1282

SLIDING SUNROOF
GLASS PANEL ADJUSTMENT
1. Fully close the glass panel.
2. Measure the gap and height between the glass
panel and body.
Clearance
Nominate
(mm {in})
Minimum
(mm {in})
Maximum
(mm {in})
a
0.75 (0.03) 0.25 (0.01)
1.25 (0.04)
b
0(0} —
—
W 6 U 9 1 5 W 0 9
3. If not as specified, loosen the glass panel
installation screws, and reposition the glass panel.
4. Tighten the glass panel installation screws.
Tightening torque
2.5— 3.5 N m {25— 36 kgf cm, 22— 31 in lbf}
SUNROOF MOTOR INSPECTION
Motor
1. Remove the sunroof motor. (Refer to 09-15
SUNROOF MOTOR REMOVAL.)
2. Apply battery positive voltage to the sunroof motor
terminals and check the operation of the motor.
Connection
Motor operation
B+ GND
E
F
Open/Tilt down (turn right)
F E Close/Tilt up (turn left)
W 6 U 9 1 5 W 1 0
3. If not as specified, replace the sunroof motor.
Limit Switch
1. Remove the headliner. (Refer to 09-17
HEADLINER REMOVAL/INSTALLATION.)
2. Disconnect the connector.
3. Check for continuity between the sunroof motor
terminals by using an ohmmeter.
O O : Continuity
Glass panel
position
Terminal
A B
c
D
Fully open
O
------
O—
-----
0
—
o
o
------ —
o
Fully closed
Fully tilt up
O----- — 0
o ------ — o
W 6 U 9 1 5 W A U
OPEN/TILT DOWN
W 6 U 9 1 5 W A S
W 6 U 9 1 5 W A V
4. If not as specified, replace the sunroof motor.
C L O S E /T IL T UP
0 9 -1 5 -6