Mazda MX-6 1998, Workshop Manual

Page: 1218 / 1282

INTERIOR TRIM
REAR DOOR TRIM REMOVAL/INSTALLATION
W 6 U 9 1 7 W 2 0
1. Disconnect the negative battery cable if equipped 9. Install In the reverse order of removal,
with a power window.
2. Remove the regulator handle if equipped with a
manual window.
3. Remove the screw to remove the inner handle.
4. Turn over the recess cover to remove the screw.
5. Remove the fasteners.
6. Pull the rear door trim to disengage clips A from
the body.
7. Pull the rear door trim upward to disengage hooks
B from the body.
8. Disconnect the connector if equipped with a power
window.
CLIP
HOOK
4U.
A
W 6 U 9 1 7 W A M
A-PILLAR TRIM REMOVAL/INSTALLATION
W 6 U 9 1 7 W 2 1
1. Turn over the seaming welt. 5. Install in the reverse order of removal.
2. Pull the A-pillar trim to disengage clips A and pin
B from the body.
3. Pull the A-pillar trim upward to disengage hook C
from the body.
4. Pull the A-pillar trim upward to disengage hook D
from the dashboard.
0 9 -1 7 -1 0