Mazda MX-6 1998, Workshop Manual

Page: 864 / 1282

AUTOMATIC TRANSAXLE [GF4A-EL]
Transaxle Installation Note
Warning
•
Verify that the transaxle is securely
supported by the jack. If the transaxle
should fall, serious injury or death and
damage to the vehicle could result. Before
removing the transaxle make sure that the
jack is securely supporting it.
No.2 Engine Mount, Engine Mount Member
Installation Note
1. Position the direction indicator on engine mount
member bushings facing toward the front side,
and install the bushings onto the engine mount
member.
2. To install the engine mount member, put the No.2
engine mount stud bolts through the engine mount
member installation holes.
3. Install the engine mount member bolts A and nuts
A.
Tightening torque
A: 67— 93 N m {6.8— 9.5 kgf-m, 50— 68 ftlb f}
4. Loosely tighten the No.2 engine mount nuts B.
5. Remove the SST (engine support).
6. Tighten the No.2 engine mount nuts B.
1. Set the transaxle on a jack and lift it into place.
W 6 U 5 1 7 W E 8
2. Install the transaxle mounting bolts.
Tightening torque
68— 99 N m {6.9— 10.1 kgf-m, 50.0— 73.0 ft lbf}
W 6 U 5 1 7 W E 9
3. Install the torque converter nuts.
Tightening torque
38— 60 N m {3.8—6.2 kgf-m, 28— 45 ft lbf}
4. Hand tighten No.4 engine mount nuts.
Tightening torque
75— 104 N-m
{7.6— 10.7 kgf-m, 54.9— 77.3 ft lbf}
Tightening torque
B: 75— 104 N-m {7.6— 10.7 kgf-m, 55— 77 ft lbf}
0 5 -1 7 B -2 4