Mazda MX-6 1998, Workshop Manual

Page: 460 / 1282

INTAKE-AIR SYSTEM [KL]
INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [KL]
W 6 U 1 1 3 W 5 2
Warning
•
When the engine and intake-air system are hot, they can badly burn. Turn off the engine and wait
until they are cool before removing or installing the intake-air system.
1. Disconnect the negative battery cable.
2. Drain the engine coolant from radiator. (Refer to 01-12 COOLING SYSTEM SERVICE WARNINGS.) (Refer
to 10-12 ENGINE COOLANT REPLACEMENT.)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Refill the engine coolant to radiator. (Refer to 01-12 COOLING SYSTEM SERVICE WARNINGS.) (Refer to
10-12 ENGINE COOLANT REPLACEMENT.)
9 Intake manifold stay
10
Ventilation pipe
11 Intake manifold component
xt
Removal Note
tr Installation Note
12 Vacuum chamber
13 VRIS check valve (one-way)
j t
Inspection
14 Intake air temperature sensor
1 Fresh-air duct
2 Air cleaner
3 Air cleaner element
4 Mass air flow sensor
5 Air hose
6 Accelerator cable
7 Throttle body
8 IAC valve
0 1 -1 3 B -2