Mazda MX-6 1998, Workshop Manual

Page: 584 / 1282

FRONT SUSPENSION
TRANSVERSE MEMBER AND FRONT CROSSMEMBER REMOVAL/INSTALLATION
W 6 U 2 1 3 W 0 8
1. Remove the front exhaust pipe. (Refer to 01-15A EXHAUST SYSTEM REMOVAL/INSTALLATION [FS].)
(Refer to 0 1 -1 5B EXHAUST SYSTEM REMOVAL/INSTALLATION [KL].)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. Inspect the front wheel alignment and adjust it as necessary.
67—93 {6.8— 9.5,49—68}
7 Lower arm ball joint bolt
8
Crossmember and steering gear component
w Removal Note
9
Steering gear and linkage
10
Front stabilizer
tr FRONT STABILIZER
REMOVAL/INSTALLATION
11
Front lower arm
12
Front crossmember
1 Transverse member
2
Engine mount member
c r 0 5 -1 5 MANUAL TRANSAXLE
REMOVAL/INSTALLATION, Engine Mount
Member Removal Note
c r 0 5 -1 5 MANUAL TRANSAXLE
REMOVAL/INSTALLATION Engine Mount
Member Installation Note
3
No.1 engine mount nut and bolt
4 Pressure pipe and return hose
5 Intermediate shaft bolt
6
Tie-rod end ball joint
p - 0 6 -1 2 STEERING GEAR AND LINKAGE
REMOVAL/INSTALLATION, Tie-rod End Ball
Joint Removal Note
0 2 -1 3 -7