Mazda MX-6 1998, Workshop Manual

Page: 1214 / 1282

INTERIOR TRIM
REAR CONSOLE REMOVAL/INSTALLATION
Note
• To remove the installation screws in the
middle of the console, use an L-shape
screwdriver.
1. Remove the boot panel.
2. Remove the front console.
3. Remove the center panel.
4. Remove the screws to remove the rear console.
W 6 U 9 1 7 W 0 9
SCREW
W 6 U 9 1 7 W A 8
5. Install in the reverse order of removal.
REAR CONSOLE DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
W 6 U 9 1 7 W 1 0
1 S c r e w A
2 R e a r c o n s o le lid
3 S c r e w B
4 R e a r c o n s o le lid in n e r
5 R e a r c o n s o le lid lo c k
6 R e a r c o n s o le lid h in g e
7
S c r e w C
8 R e a r c o n s o le b o x
GLOVE COMPARTMENT REMOVAL/INSTALLATION
1. Open the glove compartment and pull up on the
right side to disengage hook A from the center
lower panel.
HOOK
W 6 U 9 1 7 W A A
0 9 -1 7 -6
W 6 U 9 1 7 W 1 1
2. Slide the glove compartment to the right to
remove it.
GLOVE COMPARTMENT
W 6 U 9 1 7 W A B
3. Install in the reverse order of removal.