Mazda MX-6 1998, Workshop Manual

Page: 1210 / 1282

INTERIOR TRIM
DASHBOARD REMOVAL/INSTALLATION
W 6 U 9 1 7 W 0 1
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module. (Refer to 08-10 DRIVER-SIDE AIR BAG MODULE
REMOVAL/INSTALLATION.)
3. Remove the passenger-side air bag module. (Refer to 08-10 PASSENGER-SIDE AIR BAG MODULE
REMOVAL/INSTALLATION.)
4. Remove the steering wheel. (Refer to 06-12 STEERING WHEEL AND COLUMN
REMOVAL/INSTALLATION.)
5. Remove the column cover.
6. Remove the side wall. (Refer to 09-17 SIDE WALL REMOVAL/INSTALLATION.)
7. Remove the front side trim. (Refer to 09-17 FRONT SIDE TRIM REMOVAL/INSTALLATION.)
8. Remove the under cover.
9. Remove the lower panel. (Refer to 09-17 LOWER PANEL REMOVAL/INSTALLATION.)
10. Remove the installation nuts then shift the assembled steering shaft in the dashboard. (Refer to 06-12
STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
11. Remove the PCM. (Refer to 01-40 PCM REMOVAL/INSTALLATION.)
12. Remove the A-pillar trim.
13. Remove in the order indicated in the table.
14. Install in the reverse order of removal.
3
C o n n e c to r
4 D a s h b o a r d
1
Cover
2
Bolt
0 9 -1 7 -2