Mazda MX-6 1998, Workshop Manual, Page: 836 / 1282

AUTOMATIC TRANSAXLE [LA4A-EL]
49 UN01 107
22. Lubricate the #1 thrust bearing with petroleum jelly
and install on the pump support.
16. Install the separator plate and new gasket.
GASKET
14. Remove the pump seal and discard it.
W 6 U 5 1 7 W C A
20. Install the new pump seal. Ensure that the white
stripe is visible all around the pump.
21. Visually inspect the case flange for damage or
burrs.
W 6 U 5 1 7 W C C
23. Lubricate the pump support seals and the pump
bore in the case.
24. Lower the pump component into the case.
W 6 U 5 1 7 W C 6
15. Install the SST in the holes. Use the bolt hole next
to the TSS sensor hole and the bolt hole opposite
it for the SST.
18.
19.
W 6 U 5 1 7 W C 9
Install four (4) mounting bolts and tighten the bolts
to 13 N-m {1.3 kgf-m, 10 ftlb f}.
Remove the SST and install and torque the
re m a in in g s ix (6) b o lts to
13 N.m {1.3 kgf-m, 10
ftlb f).
OIL PUMP BODY
SEPARATOR
PLATE
OIL PUMP
BODY
17. Install the pump support.
PUMP SUPPORT
SEAL RING
WHITE STRIPE
W 6 U 5 1 7 W C B
W 6 U 5 1 7 W C 8
W 6 U 5 1 7 W C 7
PUMP
W 6 U 5 1 7 W C D
0 5 -1 7A -31