Mazda MX-6 1998, Workshop Manual

Page: 882 / 1282

STEERING
06
SECTION
GENERAL PROCEDURES . . . . 06-10 TECHNICAL D A TA ............
ENGINE SPEED SENSING SERVICE T O O L S ..............
POWER STEERING ............. 06-12
. . . 06—50
. . . 06-60
06-10 GENERAL PROCEDURES
I
PRECAUTION (S TE E R IN G )................... 06-10-1
PRECAUTION (STEERING)
Wheels and tires removal/installation
• The removal and installation procedures for the
wheels and tires are not mentioned in this section.
When a wheel is removed, tighten it to 89— 117
N m {9.0— 12.0 kgf-m, 66— 86 ft lbf}.
Power steering components removal/installation
• If any power steering fluid line has been
disconnected anytime during the procedure, add
W 6 U 6 1 0 W 0 1
ATF M -III or equivalent (e.g. Dexron®II), bleed
the fluid lines, and inspect for leakage after the
procedure has been completed.
Connectors disconnection/connection
• Disconnect the negative battery cable before
doing any work that requires handling of
connectors. Connect the negative battery cable
only after the work is completed.
0 6 -1 0 -1