Mazda MX-6 1998, Workshop Manual

Page: 1254 / 1282

ENTERTAINMENT
5. Verify that the rack end fits with the internal gear
of the power antenna.
6. Turn the ignition switch to LOCK. The power
antenna will operate and retract the antenna mast.
7. After the antenna mast is fully retracted, tighten
the mounting nut to the specification.
Tightening torque
2.5—2.9 N m {25— 30 kgf cm, 22— 26 in lbf}
W 6 U 9 2 0 W A L
AUDIO AMPLIFIER REMOVAMNSTALLATION
1. Disconnect the negative battery cable.
2. Remove the passenger’s side front seat. (Refer to
09-13 FRONT SEAT
REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
4 . In sta ll in th e re v e rs e o rd e r of rem oval.
W 6 U 9 2 0 W A M
W 6 U 9 2 0 W 1 6
1 Bolt
2
Connector
3
Audio amplifier
AUDIO UNIT REMOVAL
1. Disconnect the negative battery cable.
2. Remove the hole covers by inserting a small
tape-wrapped flathead screwdriver into the slot
and carefully pry them off without scratching the
center panel. Pry up and pull off the hole covers
carefully to prevent the posts from breaking off.
W 6 U 9 2 0 W 1 7
3. With the beveled parts of the SST (Removing tool)
facing inward, insert them into the unit.
4. Pull the SST (Removing tool) outward and forward
to slide out the unit.
W 6 U 9 2 0 W A N
i
W 6 U 9 2 0 W A T
5. Disconnect the connectors and antenna jack.
0 9 -2 0 -8