Mazda MX-6 1998, Workshop Manual, Page: 1225 / 1282

LIGHTING SYSTEMS
HEADLIGHT REMOVAL/INSTALLATION
Caution
•
When you slide the headlight, the
headlight may hit the edge of the front
fender panel. This may cause scratches on
the front fender panel. To avoid this, attach
protective tape to the edge of the front
fender panel.
1. Disconnect the negative battery cable.
2. Remove the front combination light.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Adjust the headlight aiming. (Refer to 09-18
HEADLIGHT ADJUSTMENT)
W 6 U 9 1 8 W A 1
HEADLIGHT BULB REMOVAL/INSTALLATION
W 6 U 9 1 8 W 0 3
Caution
•
A halogen bulb generates extremely high
heat when it is used. If the surface of the
bulb is soiled, excessive heat will build up
and the light’s life will be shortened. When
replacing the bulb, hold the metal flange,
not the glass.
1. Disconnect the negative battery cable.
2. Disconnect the connector.
3. Remove the cover.
4. Release the clip to remove the headlight bulb.
5. Install in the reverse order of removal.
W 6 U 9 1 8 W 0 2
1 Bolt
2 Connector
3
Headlight
0 9 -1 8 -2