Mazda MX-6 1998, Workshop Manual

Page: 395 / 1282

TROUBLESHOOTING [CRUISE CONTROL SYSTEM]
STEP
INSPECTION ACTION
26
Disconnect clock spring connector (4-pin).
Measure voltage at terminal C (ignition 1
signal) of clock spring (4-pin) connector of
wiring harness.
Is voltage 12 V?
Yes
Go to next step.
No Repair wiring harness from TURN 10 A fuse to clock
spring, then go to step 37.
27 Inspect cruise control switch.
c r 0 1 -2 0 CRUISE CONTROL SWITCH
INSPECTION
Is it okay?
Yes Repair short cord on clock spring connected to TURN 10
A fuse or cruise control switch, then go to step 37.
No Replace cruise control switch, then go to step 37.
28*
Measure voltage at terminal B (brake on/off
signal) and G (brake on/off signal) of cruise
actuator.
zr 0 1 -2 0 CRUISE ACTUATOR
INSPECTION
Is voltage correct?
Yes Go to step 34.
No
Incorrect voltage at B terminals:
Go to next step.
Incorrect voltage at G terminals:
Go to step 31.
29*
Measure voltage at terminal B (brake on/off
signal) of brake switch connector of wiring
harness.
Is voltage 12 V?
Yes Go to next step.
No
Repair wiring harness from STOP 15 A fuse to brake
switch, then go to step 37.
W 6 U 1 0 1 W P C
0 1 -0 1 C -7