Mazda MX-6 1998, Workshop Manual, Page: 1131 / 1282

BODY PANELS
09-10 BODY PANELS
FUEL-FILLER LID A D J U S T M E N T 09-10-1
FUEL-FILLER LID
REMOVAL/INSTALLATION ....................09-10-1
HOOD A D JU S T M E N T ............................... 0 9 -1 0 -2
G a p ...........................................................0 9 -1 0 -2
H e ig h t....................................................... 0 9 -1 0 -2
HOOD REM O VAL/INSTALLATIO N 0 9 -1 0 -2
TRUNK LID A D J U S T M E N T ......................0 9 -1 0 -3
Gap and H e ig h t....................................... 0 9 -1 0 -3
T e n s io n ..................................................... 0 9 -1 0 -3
TRUNK LID REMOVAL/INSTALLATION .. 0 9 -1 0 -4
Balance Spring Removal N o te 0 9 -1 0 -4
FRONT BUMPER
REM O VAL/IN STALLATIO N .................... 0 9 -1 0 -4
REAR BUMPER
R EM O VAL/IN STALLATIO N .................... 0 9 -1 0 -5
FRONT FENDER PANEL
REM O VAL/IN STALLATIO N .................... 0 9 -1 0 -6
FUEL-FILLER LID ADJUSTMENT
1. Measure the gap and height between the fuel-filler
lid and the body.
Clearance
Standard
(mm {in})
Minimum
(mm {in})
Maximum
(mm {in})
a
3 .5(0.14} 2.5 {0.10} 4.5 {0.17}
b
0.5 {0.02} -0 .3 {-0.01} 1.3 (0.05}
a
JL
r
SEC. A -A
W 6 U 9 1 0 W A 0
W 6 U 9 1 0 W 0 1
2. If not as specified, loosen the fuel-filler lid
installation screws and reposition the fuel-filler lid.
3. Tighten the fuel-filler lid installation screws.
FUEL-FILLER LID REMOVAL/INSTALLATION
1. Remove the screws, and remove the fuel-filler lid.
SCREW
W 6 U 9 1 0 W 0 2
2. Install in the reverse order of removal.
3. Adjust the fuel-filler lid. (Refer to 09-10
FUEL-FILLER LID ADJUSTMENT.)
0 9 -1 0 -1