Mazda MX-6 1998, Workshop Manual

Page: 1139 / 1282

DOORS AND LIFTGATE
FRONT DOOR LOWER WEATHERSTRIP REMOVAL/INSTALLATION
W6U911W04
1. Remove the front door trim. (Refer to 09-17 4. Install In the reverse order of removal.
FRONT DOOR TRIM
REMOVAL/INSTALLATION.)
2. Disengage the clips by using a fastener remover.
3. Remove the front door lower weatherstrip.
W 6 U S 1 1 W A 3
REAR DOOR ADJUSTMENT
1. Remove the rear door lock striker.
2. Measure the gap and height between the rear
door and body.
Clearance
Nominate
(mm {in})
Minimum
(mm {in})
Maximum
(mm {in})
a
4.5(0.18} 3.5 {0.14} 5.5 {0.21}
b 0 (0 }
-1 .0 {-0.03} 0.5 {0.01}
c 0 {0 }
-0 .5 {-0.01} 1.0 {0.03}
d 0 {0 } -1 .5 {-0.05} 1.5 {0.05}
e
5.0 {0.20} 4.0 {0.16} 6.0 {0.23}
W 6 U 9 1 1 W 0 5
3. Hand tighten the rear door lock striker.
4. If not as specified, loosen the door hinge mounting
bolts and the rear door lock mounting screws, and
reposition the door.
5. Tighten the bolts and the screws.
6. Adjust the rear door lock striker. (Refer to 09-14
REAR DOOR LOCK STRIKER ADJUSTMENT.)
sec. A -A sec B_B
e
•
sec. C-C
0 9 -1 1 -3