Mazda MX-6 1998, Workshop Manual, Page: 661 / 1282

CONVENTIONAL BRAKE SYSTEM
REAR BRAKE (DRUM) REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation,
(1) Depress the brake pedal several times. Then verify that the brakes do not drag.
Inspect for the pedal-to-floor clearance.
Inspect for the parking brake lever stroke.
(
2
)
(3)
12.9—21.5 N m
{130— 220 k g fe m ,
113— 190 In -lb f}
9.81— 12.7 N-m
{100— 130 k g fe m ,
87— 112 In-lbf >
19— 25
{1.9— 2.6,14— 19}
9.81— 14.7 N m
{100— 150 k g fe m ,
87— 120 In -lb f}
— £
APPLY g TO SHADED AREA
' 49 0259 770B
177— 235
{18.0—24.0,131— 173}
N m {kgf-m , ft lb f }
W 6 U 4 1 1 W B H
1 Hub cap
2 Screw
3 Brake drum
p r Removal Note
p - Installation Note
4 Locknut
tr 03-11 W HEEL HUB, STEERING KNUCKLE
REMOVAL/INSTALLATION, Locknut
Removal Note
03-11 W HEEL HUB, STEERING KNUCKLE
REMOVAL/INSTALLATION, Locknut
Installation Note
5 Wheel hub
6
ABS wheel-speed sensor (if equipped)
7 Return spring
8 Hold pin and hold spring
9
Anti-rattle spring
10 Leading shoe
11 Trailing shoe
12 Operating lever
13 Quadrant
14 Quadrant spring
15
Parking brake cable
16 Brake pipe
17 Wheel cylinder
18 O-ring
19 Backing plate
0 4 -1 1 -2 0