Mazda MX-6 1998, Workshop Manual

Page: 655 / 1282

CONVENTIONAL BRAKE SYSTEM
FRONT DISC PAD REPLACEMENT
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
N m {k g fm , ft lb f )
W 6 U 4 1 1 W B 2
30—41 {3.0—4.2,22— 28}
1
Cap
2 Lock bolt
3 Caliper
4 M-spring
5 Disc pad
c r FRONT BRAKE (DISC)
REMOVAL/INSTALLATION, Disc Pad
Installation Note
6 Guide plate
FRONT CALIPER DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of removal.
W 6 U 4 1 1 W 1 5
' 49 0259 770B Nm {kgfcm, inlbf}
W6U411WB3
1
Dust seal
2 Piston
tr Disassembly Note
3 Piston seal
in? Disassembly Note
4
Bleeder cap, bleeder screw
5 Caliper body
6 Boot
Piston Disassembly Note
Caution
•
Blow the compressed air slowly to prevent
the piston from suddenly popping out.
• Place a piece of wood in the caliper, then blow
compressed air through the hole to force the
piston out of the caliper.
0 4 -1 1 -1 4