Mazda MX-6 1998, Workshop Manual

Page: 463 / 1282

INTAKE-AIR SYSTEM [KL]
VARIABLE RESONANCE INDUCTION SYSTEM (VRIS) SOLENOID VALVE No.1 No.2 INSPECTION [KL]
W 6 U 1 1 3 W 5 8
1. Remove the VRIS solenoid valve No.1 and No.2.
2. Check for air flow between each port under the
following conditions.
O— O : Continuity 0 = 0 : Airflow
Step
Terminal Port
A B A B
c
1
L/1
------ -----
U
2 B+
GND
o = = o
W 6 U 1 1 3 W B 9
3. If not as specified, replace the necessary parts.
ACCELERATOR PEDAL REMOVAL/INSTALLATION [KL]
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
W 6 U 1 1 3 W 5 9
1 Accelerator cable
et
Installation Note
2 Retainer
3 Accelerator pedal
4 Return spring
Accelerator Cable installation Note
• Carry out the “ACCELERATOR CABLE
INSPECTION/ADJUSTMENT” procedure after
installing the aocelerator cable. (Refer to
ACCELERATOR CABLE
INSPECTION/ADJUSTMENT.)
W 6 U 1 1 3 W C 1
0 1 -1 3 B -5