Mazda MX-6 1998, Workshop Manual, Page: 961 / 1282

TROUBLESHOOTING [AIR BAG SYSTEM]
STEP INSPECTION ACTION
Is terminal 11 of instrument cluster connector
(12-pin) securely connected with connector?
W 6 U 8 0 1 W A J
Yes Go to next step.
No Reconnect properly, then go to step 10.
Is terminal 11 of instrument cluster connector
(12-pin) damaged? Yes Repair or replace terminal, then go to step 10.
No Go to next step.
Check for continuity between terminal 11 and
3N at print plate No.1 of instrument cluster.
Is there continuity?
Yes Go to next step.
No Replace print plate No.1, then go to step 10.
Turn ignition switch to LOCK.
Disconnect negative battery cable and wait for
more than 1 minute to allow the backup
power supply of SAS unit to deplete its stored
power.
Remove the driver-side side wall.
Is terminal Q of SAS unit connector (21-pin)
securely connected with connector?
Q
Yes Go to next step.
No Reconnect properly, then go to step 10.
W 6 U 8 0 1 W A M
Is terminal Q of SAS unit connector (21-pin)
damaged? Yes
Repair or replace terminal, then go to step 10.
No Go to next step.
0 8 -0 1 A-11