Mazda MX-6 1998, Workshop Manual

Page: 654 / 1282

CONVENTIONAL BRAKE SYSTEM
FRONT BRAKE (DISC) REMOVAL/INSTALLATION
W 6 U 4 1 1 W 1 3
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, depress the pedal several times, rotate the wheel by hand, and verify that the brake does
not drag.
1 Flexible hose
2 Cap
3 Lock bolt
4 Caliper
5 M-spring
6
Disc pad
tr Installation Note
7 Guide plate
8 Mounting support
9
Disc plate
c r Removal Note
D- Installation Note
Disc Plate Removal Note
• Mark the wheel hub bolt and disc plate for guide at
installation before removal.
2. Install the disc plate and align the marks put
before removal.
Disc Pad Installation Note
1. Push the piston fully inward by using the SST.
2. Install the disc pad.
Disc Plate Installation Note
1. Remove any rust or grime on the contact face of
the disc plate and wheel hub.
0 4 -1 1 -1 3
79— 101
{8.0— 10.4,58—75.2}
22—29
{2.2— 3.0,16— 21}
30—41 1
{3.0—4.2,22— 28}
W 6 U 4 1 1 W A Z
MARK
W 6 U 4 1 1 W B 0