R&S
®
ZVL
System Overview
Basic Concepts
Quick Start Guide 1303.6538.62-01
76
Context menu of the marker info field
A right mouse click on the marker info field opens a context menu:
Movable Marker Info
allows the marker info field to be placed to any position in the
diagram area. The remaining settings correspond to the most common commands in
the
Trace
–
Marker
and
Trace
–
Search
menus.
3.1.5.7 Channel Settings
The main properties of all channels assigned to the traces in the diagram area are
displayed in the channel list below the diagram.
Each line in the channel list describes a single channel. The channel of the active trace
is highlighted. The lines are divided into several sections with the following contents
(from left to right):
E
Channel name indicates the current channel name. The default names for new
channels are Ch<n> where <n> is a current number. Right-click the section and
call the
Channel Manager
from the context menu to change the channel name.
E
Start value of the sweep indicates the lowest value of the sweep variable (e.g. the
lowest frequency measured), corresponding to the left edge of the Cartesian
diagram.
E
Color legend shows the display color of all traces assigned to the channel. The
colors are different, so the number of colors is equal to the numbers of traces
assigned to the channel.
E
Additional stimulus parameter shows either the power of the internal signal source
(for frequency sweeps and time sweeps) or the CW frequency (for power sweeps).
E
Stop value of the sweep indicates the highest value of the sweep variable (e.g. the
highest frequency measured), corresponding to the right edge of the Cartesian
diagram. Right-click any of the sections in the trace list (except
Color legend)
to
open a context menu and access the most common tasks related to the section.
Context menus of the channel list
A right mouse click on the channel name, the sweep range, and the additional
parameter section of the channel list opens the following context menus, respectively:
