R&S ZVL
GUI Reference
Trace Menu
Operating Manual 1303.6580.32-06
160
By default the search range coincides with the sweep range. If the active trace contains no markers, a
marker
Mkr 1
is created to indicate the search result.
Next Peak
is disabled while a
Target Search
is
active.
Remote control:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute NPEak
CALCulate<Chn>:MARKer<Mk>:FUNCtion:RESult?
Start = Marker
Sets the beginning (start) of the sweep range equal to the stimulus value of the active marker, leaving the
end (stop) value unchanged. The active marker appears at the left edge of the diagram.
Remote control:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:STARt
Stop = Marker
Sets the end (stop) of the sweep range equal to the stimulus value of the active marker, leaving the
beginning (start) unchanged. The active marker appears at the right edge of the diagram.
Remote control:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:STOP
Center = Marker
Sets the center of the sweep range equal to the stimulus value of the active marker, leaving the span
unchanged. The active marker appears in the center of the diagram.
Remote control:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:CENTer
Ref Value = Marker
Sets the reference value equal to the response value of the active marker, leaving the values of the
vertical divisions
(Scale Div.)
unchanged.
Max = Marker
Sets the upper edge of the diagram equal to the response value of the active marker, leaving the values of
the vertical divisions
(Scale Div.)
unchanged.
Min = Marker
Sets the lower edge of the diagram equal to the response value of the active marker, leaving the values of
the vertical divisions
(Scale Div.)
unchanged.
Zero Delay at Marker
Corrects the
measurement result by adding or subtracting a constant group delay. This function must be
applied to a trace which is displayed in group delay format. The trace is shifted in vertical direction so that
