R&S ZVL
Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
350
Instrument-Control Commands
The remainder of this chapter lists the SCPI commands of the R&S ZVL in alphabetical order.
CALCulate
CALCulate<Chn>:CLIMits...
This subsystem controls the composite limit check.
CALCulate<Chn>:CLIMits:FAIL?
Returns a 0 or 1, to indicate whether or not a composite limit or ripple limit check on several traces has
failed.
<Chn>
Channel number used to identify the active trace. This suffix is not relevant
because the command provides a summary of all individual limit fails.
Response
0 | 1 - 0 represents pass for all individual limit checks (also returned if no limit
check is active at all), 1 means that the limit checks for one or more traces failed.
*RST value
0
SCPI,
Command
Types
Device-specific, query only.
Example:
*RST; CALC:LIM:CONT 1 GHZ, 2 GHZ
Define an upper limit line segment in the stimulus range between 1 GHz and 2
GHz, using default response values.
CALC:LIM:STAT ON; FAIL?
Switch the limit check on and query the result.
CALC:CLIM:FAIL?
Query the result for the composite limit check. As only one trace is tested, the
response should be equal to the previous response..
CALCulate<Chn>:DATA...
This subsystem provides access to the results of a measurement.
The trace data is transferred in either ASCII or block data (REAL) format, depending on the
FORMat[:DATA] setting. If the block data format is used, it is recommended to select EOI as
receive terminator (
SYSTem:COMMunicate:GPIB[:SELF]:RTERminator EOI
).
