R&S ZVL
GUI Reference
SETUP Key
Operating Manual 1303.6580.32-06
293
Network Address
Opens a submenu to configure the internet protocol properties and the computer name.
Menu (Key)
Submenu Submenu Command
SETUP
g
General Setup
g
Network Address
g
Computer Name
IP Address
Subnet Mask
DHCP On/Off
Computer Name
Opens an edit dialog box to enter the computer name via the keypad. The naming conventions of
Windows apply. If too many characters and/or numbers are entered, in the status line, a message is
displayed.
IP Address
Opens an edit dialog box to enter the IP address via the keypad. The TCP/IP protocol is preinstalled with
the IP address 10.0.0.10. If the DHCP server is available (
DHCP On
), the dialog box entry is read–only.
The IP address consists of four number blocks separated by dots. Each block contains 3 numbers in
maximum (e.g. 100.100.100.100), but also one or two numbers are allowed in a block (as an example see
the preinstalled address).
Subnet Mask
Opens an edit dialog box to enter the subnet mask via the keypad. The TCP/IP protocol is preinstalled
with the subnet mask 255.255.255.0. If the DHCP server is available (
DHCP On
), the dialog box entry is
read–only.
The subnet mask consists of four number blocks separated by dots. Each block contains 3 numbers in
maximum (e.g. 100.100.100.100), but also one or two numbers are allowed in a block (as an example see
the preinstalled address).
DHCP On/Off
Switches between DHCP server available (On) or not available (Off). If a DHCP server is available in the
network, the IP address and subnet mask of the instrument are obtained automatically from the DHCP
server.
LXI Configuration Menu
Opens the LXI submenu containing the following softkeys:
