R&S ZVL
Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
535
STATus:QUEStionable:PTRansition
Sets the positive transition filter. Setting a bit causes a 0 to 1 transition in the corresponding bit of the
associated condition register to cause a 1 to be written in the associated bit of the corresponding event
register.
<NRf>
0 to 65535 (decimal representation)
*RST value
– (see also
Reset Values of the Status Reporting System)
SCPI, Command Types
Confirmed, command or query
Example:
STAT:QUES:PTR 1536
Set bits no. 9 and 10 of the QUEStionable:PTRansition register
STATus:QUEStionable:LIMit<1|2>:CONDition?
Returns the contents of the CONDition part of the QUEStionable:LIMit<1|2> register. Reading the
CONDition registers is nondestructive.
*RST value
–
SCPI, Command
Types
Confirmed, query only
Example:
STAT:QUES:LIMit:COND?
Query the CONDition part of the QUEStionable:LIMit1 register to retrieve the
current status of the limit check.
STATus:QUEStionable:LIMit<1|2>:ENABle
Sets the enable mask which allows true conditions in the EVENt part of the QUEStionable:LIMit<1|2>
register to be reported in the summary bit. If a bit is 1 in the enable register and its associated event bit
transitions to true, a positive transition will occur in the summary bit (bit 10 of the QUEStionable register
for the LIMit1 register, bit 0 of the LIMit1 register for the LIMit2 register).
<NRf>
0 to 65535 (decimal representation)
*RST value
– (see also
Reset Values
of the status reporting system)
SCPI, Command Types
Confirmed, command or query
Example:
STAT:QUES:LIM2:ENAB 6
Set bits no. 1 and 2 of the QUEStionable:LIMit2:ENABle register
STATus:QUEStionable:LIMit<1|2>[:EVENt]?
Returns the contents of the EVENt part of the QUEStionable:LIMit<1|2> register. Reading an EVENt
register clears it.
