R&S ZVL
Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
501
<Ch>
Channel number of the calibrated channel.
*RST value
–
SCPI,
Command
Types
Device-specific, no query
Example:
CORR:COLL:METH REFL1
Select a one-port normalization at port 1 with an open standard as calibration type.
CORR:COLL:SAVE:DEF
Calculate a dummy system error correction for the normalization at port 1. The
dummy system error correction provides the reflection tracking error term
'SCORR3'.
CORR:DATA? 'SCORR3'
Query the dummy system error correction term. The response is a 1 (written as 1,0
for the real and imaginary part) for each sweep point (no attenuation and no phase
shift between the analyzer and the calibration plane).
CORR:DATA 'SCORR3',<ASCII_data>
Replace the dummy system error correction term with your own correction data,
transferred in ASCII format.
[SENSe<Ch>:]CORRection:COLLect:SAVE:SELected
Calculates the system error correction data from the acquired measurement results
(
[SENSe<Ch>:]CORRection:COLLect[:ACQuire]:SELected),
stores them and applies them to
the calibrated channel <Ch>. To avoid incompatibilities, older system error correction data is deleted
unless it has been transferred into a cal pool (
MMEMory:STORe:CORRection <Ch>,
'<file_name>').
<Ch>
Channel number of the calibrated channel.
*RST value
–
SCPI, Command
Types
Confirmed, no query
Example:
CORR:COLL:METH:DEF 'Test',RSHort,1
Select a one-port normalization at port 1 with a short standard as calibration
type.
CORR:COLL:SEL SHOR,1
Measure a short standard connected to port 1 and store the measurement
results of this standard.
CORR:COLL:SAVE:SEL
Calculate the system error correction data and apply them to the active
channel.
