R&S ZVL
Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
378
<Mk>
Marker number in the range 1 to 10.
Range [def. unit]
– [–]
*RST value
–
SCPI, Command
Types
Device-specific, no query.
Example:
*RST; CALC:MARK ON
Create marker 1 in the center of the current sweep range and assign it to
trace no. 1.
CALC:MARK:FUNC:CENT
Leave the sweep range unchanged.
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DELTa[:STATe] <Boolean>
Switches the delta mode for marker <Mk> on trace no. <Chn> on or off.
Note:
This command is the ZVR-compatible equivalent of
CALCulate<Chn>:MARKer<Mk>:DELTa[:STATe]
.
<Chn>
Channel number used to identify the active trace.
<Mk>
Marker number in the range 1 to 10.
<Boolean>
ON | OFF - Enables or disables the delta mode.
*RST value
OFF
SCPI, Command Types
Device-specific, command or query.
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER <numeric_value>
Assigns a search range no. <numeric_value> to marker no <Mk> and selects the search range, e.g. in
order to define the start and stop values.
<Chn>
Channel number used to identify the active trace.
<Mk>
Marker number in the range 1 to 10.
<numeric_value>
Number of the search range.
Range [def. unit]
0 – fixed full span search range (equal to the sweep range)
1 to 10 – user-definable search ranges; see example
*RST value
0 (reserved for full span search range)
SCPI, Command Types
Device-specific, command or query.
Example:
CALC1:MARK1:FUNC:DOM:USER 2
Select the search range no. 2, assigned to marker no. 1 and trace no. 1.
CALC:MARK:FUNC:DOM:USER:STARt 1GHz
Set the start frequency of the search range to 1 GHz.
CALC:MARK:FUNC:DOM:USER:STOP 1.2GHz
Set the stop frequency of the search range to 1.2 GHz.
