R&S ZVL
Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
534
questionable instrument states.
STATus:QUEStionable:ENABle
Sets the enable mask which allows true conditions in the EVENt part of the QUEStionable register to be
reported in the summary bit. If a bit is 1 in the enable register and its associated event bit transitions to
true, a positive transition will occur in the summary bit (bit 3 of the STatus Byte).
<NRf>
0 to 65535 (decimal representation)
*RST value
– (see also
Reset Values of the Status Reporting System)
SCPI, Command Types
Confirmed, command or query
Example:
STAT:QUES:ENABle 1536
Set bits no. 9 and 10 of the QUEStionable:ENABle register
STATus:QUEStionable[:EVENt]?
Returns the contents of the EVENt part of the QUEStionable register. Reading an EVENt register clears it.
*RST value
–
SCPI, Command
Types
Confirmed, query only
Example:
STAT:OPER?
Query the EVENt part of the OPERation register to check whether an event
has occurred since the last reading.
STATus:QUEStionable:NTRansition
Sets the negative transition filter. Setting a bit causes a 1 to 0 transition in the corresponding bit of the
associated condition register to cause a 1 to be written in the associated bit of the corresponding event
register.
<NRf>
0 to 65535 (decimal representation)
*RST value
– (see also
Reset Values of the Status Reporting System)
SCPI, Command Types
Confirmed, command or query
Example:
STAT:QUES:NTR 1536
Set bits no. 9 and 10 of the QUEStionable:NTRansition register
