R&S ZVL
Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
435
assigned.
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:FEED '<trace_name>'
Assigns an existing trace (
CALCulate<Ch>:PARameter:SDEFine <Trace_Name>
) to a diagram area,
using the <WndTr> suffix, and displays the trace. Use
DISPlay[:WINDow<Wnd>]:TRACe:EFEed
to
assign the trace to a diagram area without using a numeric suffix.
A trace can be assigned to a diagram only once. If a attempt is made to assign the same trace a
second time (e.g. by typing
DISP:WIND2:TRAC8:FEED 'CH4TR1'
after executing the program
example below) an error message –114,"Header suffix out of range is generated.
You can open the trace manager (
DISPlay:MENU:KEY:EXECute 'Trace Manager'
) to obtain
an overview of all channels and traces, including the traces that are not displayed.
<Wnd>
Number of an existing diagram area (defined by means of
DISPlay:WINDow<Wnd>:STATe ON
).
<WndTr>
Trace number used to distinguish the traces of the same diagram area
<Wnd>.
'<trace_name>'
String parameter for the trace name, e.g. 'Trc4'.
*RST value
–
SCPI, Command
Types
Device-specific, no query.
Example:
CALC4:PAR:SDEF 'Ch4Tr1', 'S11'
Create channel 4 and a trace named
Ch4Tr1
to measure the input reflection
coefficient S11.
DISP:WIND2:STAT ON
Create diagram area no. 2.
DISP:WIND2:TRAC9:FEED 'CH4TR1'
Display the generated trace in diagram area no. 2, assigning the trace
number 9 to it.
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW DALL | MALL | '<trace_name>',
<Boolean>
Displays or hides an existing trace, identified by its trace name (
CALCulate<Ch>:PARameter:SDEFine
<Trace_Name>
), or a group of traces.
You can open the trace manager (
DISPlay:MENU:KEY:EXECute 'Trace Manager'
) to obtain an
overview of all channels and traces, including the traces that are not displayed.
<Wnd>
Number of a diagram area. This suffix is ignored; the command affects traces
in all diagram areas.
<WndTr>
Trace number. This suffix is ignored; the trace is referenced by its name.
