R&S ZVL
Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
537
Types
Example:
STAT:QUE?
Query the oldest entry in the error queue. 0,"No error" is returned if the error
queue is empty.
SYSTem...
This subsystem collects the functions that are not related to instrument performance, such as function for
general housekeeping and function related to global configurations.
SYSTem:COMMunicate:AKAL:CONNection THRough | OPEN | SHORt | MATCh,
<port_1>, <port_2>
Connects the selected calibration standard to one or two ports of the active calibration unit (see
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess
).
THRough | OPEN |
SHORt | MATCh
Connected one or two-port standard
<port_1>
Port number of the calibration unit, for one and two-port
standards
<port_2>
Second port number of the calibration unit, for two-port
standards (THRough) only, omitted for the one-port standards
*RST value
–
SCPI, Command
Types
Device-specific, command or query
Example:
SYST:COMM:AKAL:CONN THR, 1, 2
Connect a trough standard between ports 1 and 2 of the cal
unit.
SYSTem:COMMunicate:AKAL:MMEMory[:STATe] <Boolean>
Shows or hides the memory of the active calibration unit (see
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess
).
<Boolean>
ON – memory is shown in a separate drive
OFF – memory is not shown
*RST value
OFF
SCPI, Command Types
Device-specific, command or query
Example:
SYST:COMM:AKAL:MMEM ON
Show the memory of the active calibration unit.
