R&S ZVL
GUI Reference
FILE Key
Operating Manual 1303.6580.32-06
283
Select File
Sets the focus on the
Files
list.
Edit File Name
Sets the focus on the
File Name
field.
In the
Save
dialog box, the field already contains a suggestion for a new name: the file name used in the
last saving process is counted up to the next unused name. For example, if the name last used was
"test_004", the new name "test_005" is suggested, but only if this name is not in use. If the name
"test_005" is already in use, the next free name is suggested, e.g. "test_006". You can change the
suggested name to any name conform to the following naming conventions.
The name of a settings file consists of a base name followed by an underscore and three numbers, e.g.
limit_lines_005. In this example, the base name is "limit_lines". The base name can contain characters,
numbers and underscores. The file extension is added automatically.
Edit Comment
Sets the focus on the
Comment
field to enter a comment concerning the current settings file. Max. 60
characters are allowed.
Select Items
Displays the softkey submenu for selecting the items to be stored or loaded. The
Select Items
softkey in
the submenu sets the focus on the items list.
In the
Save
dialog box, all items that can be saved are displayed. The number of displayed items depends
on the installed options, as for some options additional items can be stored.
In the
Recall
dialog box, the items saved in the selected file are displayed.
Remote Control:
MMEM:SEL[:ITEM]:DEFault
MMEM:SEL[:ITEM]:HWSettings
MMEM:SEL[:ITEM]:LINes[:ALL]
MMEM:SEL[:ITEM]:TRACe[ACTive]
Enable All Items / Disable All Items
Selects all items / none of the items for saving or loading.
Remote Control:
MMEM:SEL[:ITEM]:ALL
MMEM:SEL[:ITEM]:NONE
Delete File
Deletes the selected settings file.
