R&S ZVL
Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
398
CALCulate<Chn>:RIPPle:FAIL?
Returns a 0 or 1, to indicate whether or not the global ripple limit check has failed.
Use
CALCulate<Chn>:RIPPle:SEGMent<Seg>:RESult?
to query the result for a single ripple
limit range.
<Chn>
Channel number used to identify the active trace.
Response
0 | 1 - 0 represents pass (or a disabled limit check), 1 represents fail in at least
one ripple limit range.
*RST value
0
SCPI, Command
Types
Device-specific, query only.
Example:
*RST; CALC:RIPP:DATA 1,1500000000, 2000000000,3
Define and enable a ripple limit range in the stimulus range between 1.5 GHz
and 2 GHz, assigning a ripple limit of +3 dBm.
CALC:RIPP:STAT ON; FAIL?
Switch the limit check on and query the result.
CALCulate<Chn>:RIPPle:RDOMain:FORMat COMPlex | MAGNitude | PHASe |
REAL | IMAGinary | SWR | GDELay | L | C
Deletes the existing ripple limit ranges and (re-)defines the physical unit of the ripple limit. The units of the
stimulus values are defined via
CALCulate<Chn>:RIPPle:CONTrol:DOMain.
<Chn>
Channel number used to identify the active trace.
Parameters
Keyword for the physical unit of the response values.
Range [def. unit]
The parameters form four groups:
COMPlex, REAL, IMAGinary, and SWR select dimensionless numbers
(U) for the ripple limit.
MAGNitude selects relative units (dB).
PHASe selects phase units (deg).
GDELay selects time units (s).
L selects inductance units (H/Henry).
C selects capacitance units (F/Farad).
[–]
*RST value
–
SCPI, Command
Types
Device-specific, no query.
Example
*RST; CALC:RIPP:DATA 1,1500000000, 2000000000,3
Define and enable a ripple limit range in the stimulus range between 1.5 GHz
and 2 GHz, assigning a ripple limit of +3 dBm.
CALC:RIPP:RDOM:FORM COMP
