R&S ZVL
Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
479
POINt – Decimal separator: point
COMMa – Decimal separator: comma
If the third optional parameter is omitted, points are used.
SEMicolon – Field separator: semicolon
COMMa – Field separator: comma
TABulator – Field separator: tabulator
SPACe – Field separator: space
If the fourth optional parameter is omitted, semicolons are used.
*RST value
– (the default export format is UNFormatted)
SCPI,
Command
Types
Confirmed, no query.
Example:
See MMEMory:LOAD:TRACe.
MMEMory:STORe:TRACe:USER...
The
MMEMory:STORe:TRACe:USER...
subsystem configures the custom header for trace files.
A *RST does not change the custom header settings. Press the Use Default Directories button in the
System Configuration dialog (Nwa-Setup – System Config.) to reset the settings.
MMEMory:STORe:TRACe:USER:CINFormation <Boolean>
Qualifies whether the calibration information is included in the custom header.
<Boolean>
ON | OFF – calibration information included/omitted
*RST value
ON (after
Use Default Directories
)
SCPI,
Command
Types
Device-specific, command or query.
Example:
MMEM:STORe:TRAC:USER:IINF OFF; DATE OFF; CINF OFF
Omit instrument information, date and time, and calibration information in the
custom header.
MMEM:STORe:TRAC:USER:TEXT:STAT ON
Include user notes in the custom header.
MMEM:STORe:TRAC:USER:TEXT 'Transmission coefficient S21 for DUT no. 1'
Define user notes.
MMEM:STORe:TRAC:USER:STAT ON
Apply custom header to all trace files created subsequently.
MMEM:STOR:TRAC 'TRC1', 'C:\R_S\Instr\user\Nwa\Traces\Trc1.s1p'
Store the current trace (named
Trc1
) to a file, including the custom header. The
custom header consists of a single line:
! Transmission coefficient S21 for DUT no.
1
