Rohde & Schwarz ZVL series, Operating Manual

Page: 565 / 624

R&S ZVL Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
550
IMPlied trace
MDATa1, MDATa2,
MDATa3, MDATa4,
MDATa5, MDATa6,
MDATa7, MDATa8
Memory trace named
Mem<n>[Trc<m>].
The trace name is unique because <n>
counts all data and memory traces in the
active setup.
TRACe:CLEar
TRACe:COPY
TRACe[:DATA][:RESPonse][:ALL]?
TRACe[:DATA][:STIMulus][:ALL]?
CALCulate<Chn>:MATH[:EXPRession][:DEFine]
TRACe:CLEar MDATA1 | MDATA2 | MDATA3 | MDATA4 | MDATA5 | MDATA6 |
MDATA7 | MDATA8
Deletes one of the memory traces
Mem<n>[Trc<m>],
where n = 1, ... 8.
Parameters
Identifier for the memory trace; see list of trace names. .
Range [def. unit] MDATA<n> where <n> = 1 to 8. [–]
*RST value –
SCPI, Command
Types
Device-specific, no query
Example:
SWE:POIN 20
Create a trace with 20 sweep points, making the created trace the active trace
of channel 1 (omitted optional mnemonic
SENSe1
).
TRAC:COPY "Mem_Pt20",CH1DATA
Copy the current state of the created trace to a memory trace named
"Mem_Pt20". The memory trace is not displayed.
DISP:WIND:TRAC2:FEED "MEM_PT20"
Display the created memory trace in the active diagram area (diagram area no.
1).
TRACe:COPY <memory_trc>,<data_trc>
Copies a data trace to a memory trace. The trace to be copied can be specified by two alternative
methods:
As the active data trace of channels 1 to 4 (CH1DATA, CH2DATA, CH3DATA, CH4DATA). If a
mathematical trace is active, the associated data trace is copied.
As a trace with a name (string variable)
The created memory trace can be specified as follows:
As the memory trace named
Mem<n>[Trc<m>],
where n = 1, ... 8 and
Trc<m>
is the name of the
copied data trace (MDATA1, MDATA2, MDATA3, MDATA4, MDATA5, MDATA6, MDATA7,
MDATA8)
As a memory trace with an arbitrary name (string variable)
An existing memory trace with the same name is overwritten.
The copied trace is the data trace which is not modified by any mathematical operations. To copy a
mathematical trace to a memory trace, use
TRACe:COPY:MATH
. To copy the active trace to the
memory using an automatic memory trace name, use CALCulate<Chn>:MATH:MEMorize.