R&S ZVL
GUI Reference
Help Menu
Operating Manual 1303.6580.32-06
278
swapped (
FORMat:BORDer SWAPped
).
•
If the PNA language is activated, Agilent-compatible ID and OPT strings are set. The bit
order for transferred binary data is normal.
•
If one of the
HP xxxx
languages is activated, HP xxxx-compatible ID and OPT strings are
set. Binary data is transferred in a device-specific bit order, however, the bit order can be
changed using HP xxxx-specific commands.
The ID string can be changed or reset by using the SETUP key.
Show Error Messages
activates a information popup box (tooltip) to be displayed whenever the
parser encounters an remote control command error. The tooltip appears at the bottom of the
remote or manual screen; it is
not
displayed for SCPI errors no. –113,
Undefined header:
The tooltip is to provide information that can be useful for program development and optimization;
it does not necessarily indicate that a remote control script is faulty or non-executable.
Remote control
(for
Unit of Length)
UNIT:LENGth
for
Keep Measurement
Data...
[SENSe<Ch>:]CORRection:COLLect[:ACQuire]:RSAVe:DEFault
for preset scope:
SYSTem:PRESet:SCOPe SINGle | ALL
for GPIB:
FORMat:BORDer NORMal | SWAPped
SYSTem:ERRor:DISPlay
External Tools
Opens a submenu with various demo setups:
Demo*.vbs:
Shows how to perform the settings for typical
measurement tasks.
After running a *vbs file you can modify the demo setup according to your own needs and store it to a
*.nwa file for later reuse.
Help Menu
The
Help
menu provides assistance with the network analyzer and its operation.
The
Help
menu contains the following functions:
•
Help Topics
opens this help system.
•
About NWA...
opens a dialog to retrieve information about the network analyzer and the current
firmware version.
