R&S ZVL
Command Reference
Special Terms and Notation
Operating Manual 1303.6580.32-05
346
7 Command Reference
This chapter lists all common commands and SCPI commands implemented by the analyzer.
Special Terms and Notation
This section explains the meaning of special syntax elements used in the SCPI command reference
sections. A general description of the SCPI command syntax can be found in section
SCPI Command
Structure and Syntax
in Chapter
Remote Control
.
Compatibility with ZVR and other instruments
The SCPI command set for the R&S ZVL vector network analyzer has been designed for
compatibility with older R&S network analyzers of the ZVR type. A special class of commands,
marked with the symbol
, has been implemented primarily for compatibility reasons. Use
these commands if you want to maintain compatibility with ZVR analyzers. If you want to make full
use of the ZVL features and don't need ZVR compatibility, you should use the generalized, R&S
ZVL-specific commands. A link to a generalized command is provided in the description of each
ZVR-specific command.
Similar considerations also hold for other commands that have been "implemented for compatibility
reasons".
Commands for spectrum analyzer mode are reported in the separate R&S ZVL-K1 manual; see
section Network Analyzer and Spectrum Analyzer Mode in chapter 6.
•
Information in the command tables
All commands are described according to the same scheme. The following information is
provided:
Complete command syntax and parameter list
Description of the command and its relationship with other commands
List and description of the parameters with their numerical ranges, default values and default units
SCPI conformance information, supported command types (setting command, query)
Program example
•
Order of commands
The commands are arranged in alphabetical order. SCPI systems or subsystems are arranged in
one topic.
•
Parameters
Many commands are supplemented by a parameter or a list of parameters. Parameters either
provide alternative options (setting a or setting b or setting c ..., see special character "|"), or they
form a list separated by commas (setting x,y).
•
<
Par_Name>
In the command tables and lists, parameters are generally described by a name (literal)
written in angle brackets (<>). This literal merely serves as a parameters description; in an application
program it must be replaced by one of the possible settings reported in the detailed parameter
description.
•
Example:
CONTrol:AUXiliary:C[:DATA] <numeric_value>
