R&S ZVL
Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
495
select a unit for the calibration.
<Ch>
Channel number of the calibrated channel.
'<file_name>'
Name and (possibly) directory of the cal kit file to be used for the
automatic calibration (string parameter):
If nothing is specified (empty string ' '), the default cal kit file
stored in the calibration unit is used. This file is also used in
manual control.
A NWA cal kit file name *.calkit without path denotes a
specific cal kit file stored in the Calibration Unit.
A NWA cal kit file name *.calkit with path denotes a specific
cal kit file stored in an arbitrary directory.
<port_no>
Port number(s) of the analyzer. For a 2-port automatic calibration,
either 1, 2 or 2, 1 may be entered. The analyzer automatically
detects the calibration unit ports connected to each analyzer port.
*RST value
–
SCPI,
Command
Types
Device-specific, no query
Example:
CORR:COLL:AUTO '', 1, 2
Perform an automatic 2-port TOSM calibration using the calibration
unit's default calibration kit file and arbitrary test ports of the cal unit.
[SENSe<Ch>:]CORRection:COLLect:AUTO:CKIT '<file_name>'
Generate a cal kit file with the specified name containing the cal kit data of the active calibration unit
(
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess
). The cal kit file can be stored in the calibration unit
or written to a directory on the analyzer.
<Ch>
Channel number of the calibrated channel (not relevant for this
command).
'<file_name>'
Name and (possibly) directory of the created cal kit file (string
parameter, extension *.calkit):
If no path and directory is specified, the file is stored in the
calibration
unit
(see
also
[SENSe<Ch>:]CORRection:COLLect:AUTO
). The factory
calibration data on the unit is not overwritten.
If a path and directory is specified, the file is stored in the
directory on the analyzer's hard disk.
The default directory (
MMEMory:CDIRectory
) is not used.
*RST value
–
SCPI,
Command
Types
Device-specific, no query
Example:
CORR:COLL:AUTO:CKIT 'AutoCalChar.calkit'
