R&S ZVL
GUI Reference
SETUP Key
Operating Manual 1303.6580.32-06
299
The
Advanced LAN Configuration
parameters are used as follows:
•
The
Negotiation
configuration field provides different Ethernet speed and duplex mode settings. In
general, the
Auto Detect
mode is sufficient.
•
ICMP Ping
must be enabled to use the ping utility.
•
VXI-11
is the protocol that is used for discovery of the instrument in the LAN. According to the
standard, LXI devices must use VXI-11 to provide a discovery mechanism; other additional
discovery mechanisms are permitted.
Ping
Ping is a utility that verifies the connection between the analyzer and another device. The ping command
uses the ICMP echo request and echo reply packets to determine whether the LAN connection is
functional. Ping is useful for diagnosing IP network or router failures.
The ping utility is not password-protected. To initiate a ping between the analyzer and a second connected
device,
Enable
ICMP Ping
on the
Advanced LAN Configuration
page (enabled after an LCI).
Enter the IP address of the second device
without the ping command and without any further
parameters
into the
Destination Address
field (e.g.
10.113.10.203
).
Click
Submit.
