R&S ZVL
GUI Reference
Trace Menu
Operating Manual 1303.6580.32-06
201
The reference line is indicated by a
symbol at the right edge of the diagram area. The color of the
symbol corresponds to the trace color.
Ref. Position
is defined on a linear scale between 0 (bottom line of
the diagram) and 10 (top line of the diagram).
As the
Ref. Position
is varied, the value of the reference line
(Ref. Value) is left unchanged, so the current trace is shifted together with the
Ref. Position
.
Ref. Position
is not available (grayed) for polar diagrams
(Polar, Smith, Inverted Smith)
.
Use the analyzer's drag-and-drop functionality to move the reference line symbol to the desired
position.
Remote control:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:Y:RPOSition
Maximize
Maximizes all diagram areas of the active setup to occupy the whole window, placing the active diagram
area on top. Clicking
Maximize
again restores the previous display configuration.
A double-click into any point in the diagram area is equivalent to the
Maximize
function. To view all
traces in a common, maximized diagram area, select
Overlay all
.
Remote control:
DISPlay:WINDow<Wnd>:MAXimize ON | OFF
Overlay All
Places all traces in a single diagram area which is maximized to occupy the whole window. This function
is available irrespective of the trace Format and the Channel settings; it is even possible to overlay
Cartesian and polar diagrams.
