manualshive.com logo in svg

GigaDevice Semiconductor GD32W515 Series, User Manual

The GigaDevice Semiconductor GD32W515 Series is a versatile and high-performance microcontroller designed for hardware development projects. Its comprehensive Hardware Development Manual is available for free download, providing enthusiasts with detailed instructions and insights. Unlock the full potential of this exceptional product by downloading the manual from manualshive.com.

Share
Download
background image

                                                                                                                 

GD32W51x User Manual

 

34 

 

 

Table 18-1. Description of USART important pins

 ...............................................................................591 

Table 18-2. Configuration of stop bits

 .......................................................................................................592 

Table 18-3. USART interrupt requests

.......................................................................................................606 

Table 19-1.  Definition  of  I2C-bus  terminology  (refer  to  the  I2C  specification  of  Philips 

semiconductors)

........................................................................................................................................629 

Table 19-2. Data setup time and data hold time

 ....................................................................................635 

Table 19-3. Communication modes to be shut down

 .........................................................................637 

Table 19-4. I2C configuration

.........................................................................................................................637 

Table 19-5. SMBus with PEC configuration

 ............................................................................................650 

Table 19-6. I2C error flags

...............................................................................................................................654 

Table 19-7. I2C interrupt events

 ...................................................................................................................654 

Table 20-1. SPI signal description

 ..............................................................................................................671 

Table 20-2. Quad-SPI signal description

..................................................................................................672 

Table 20-3. SPI operating modes

.................................................................................................................674 

Table 20-4. SPI interrupt requests

 ..............................................................................................................684 

Table 20-5. I2S bitrate calculation formulas

 ...........................................................................................693 

Table 20-6. Audio sampling frequency calculation formulas

 .........................................................694 

Table 20-7. Direction of I2S interface signals for each operation mode

 ....................................694 

Table 20-8. I2S interrupt

 ..................................................................................................................................699 

Table 21-1. 

SQPI controller mode definition

...........................................................................................711 

Table 22-1. QSPI signal description

 ...........................................................................................................722 

Table 22-2. QSPI singnal line modes

 .........................................................................................................724 

Table  22-3. 

Flash  secure/non-secure  and  privileged/unprivileged operation under  FMC 

mode when TrustZone is active (TZEN=1)

......................................................................................729 

Table 22-4. QSPI interrupt requests

 ...........................................................................................................731 

Table 23-1. SDIO I/O definitions

 ...................................................................................................................762 

Table 23-2. Command format

 ........................................................................................................................768 

Table 23-3. Card command classes (CCCs)

............................................................................................769 

Table 23-4. Basic commands (class 0)

......................................................................................................771 

Table 23-5. Block-Oriented read commands (class 2)

........................................................................773 

Table 23-6. Stream read commands (class 1) and stream write commands (class 3)

 .........774 

Table 23-7. Block-Oriented write commands (class 4)

.......................................................................774 

Table 23-8. Erase commands (class 5)

......................................................................................................775 

Table 23-9. Block oriented write protection commands (class 6)

 .................................................776 

Table 23-10. Lock card (class 7)

...................................................................................................................776 

Table 23-11. Application-specific commands (class 8)

 ......................................................................777 

Table 23-12. I/O mode commands (class 9)

 ............................................................................................778 

Table 23-13. Switch function commands (class 10)

 ............................................................................779 

Table 23-14. Response R1

 ..............................................................................................................................781 

Table 23-15. Response R2

 ..............................................................................................................................781 

Table 23-16. Response R3

 ..............................................................................................................................781 

Table 23-17. Response R4 for MMC

............................................................................................................782 

Table 23-18. Response R4 for SD I/O

 .........................................................................................................782 

Table 23-19. Response R5 for MMC

............................................................................................................782 

Summary of Contents for GD32W515 Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GD32W515 Series

ABB RELION REF615R Manual preview
RELION REF615R
Brand: ABB Pages: 66
Maco Standard Fitting Instructions Manual preview
Standard
Brand: Maco Pages: 38
Canon C50FSi - VB Network Camera Setup Manual preview
C50FSi - VB Network Camera
Brand: Canon Pages: 32
Rabbit 2000 Reference Manual preview
2000
Brand: Rabbit Pages: 120
Magnat Audio MC 200 Faq preview
MC 200
Brand: Magnat Audio Pages: 2
NAIM AV2 Update Instructions preview
AV2
Brand: NAIM Pages: 2
Campbell NL115 Instruction Manual preview
NL115
Brand: Campbell Pages: 42
Dahua DHI-NVR2104-P-4KS2 Quick Start Manual preview
DHI-NVR2104-P-4KS2
Brand: Dahua Pages: 23
RAK RAK3372 Quick Start Manual preview
RAK3372
Brand: RAK Pages: 30
Cypress Semiconductor CY62148E Specification Sheet preview
CY62148E
Brand: Cypress Semiconductor Pages: 10
Buffalo LinkStation Quick Setup Manual preview
LinkStation
Brand: Buffalo Pages: 2
Glacier G2080TiFE Installation Manual preview
G2080TiFE
Brand: Glacier Pages: 2
Navitar 1-62643 Dimensional Drawing preview
1-62643
Brand: Navitar Pages: 1
Harman BSS DCP-555 Installation Manual preview
BSS DCP-555
Brand: Harman Pages: 24
Amphenol C2LINX Series Installation Manual preview
C2LINX Series
Brand: Amphenol Pages: 43
Dinstar UC8000 IPPBX User Manual preview
UC8000 IPPBX
Brand: Dinstar Pages: 103
IBM TSO/E REXX User Manual preview
TSO/E REXX
Brand: IBM Pages: 242
Tripp Lite SmartRack SR42UBEXPKD Assembly Instructions Manual preview
SmartRack SR42UBEXPKD
Brand: Tripp Lite Pages: 8

Brands by name

Popular brands

Load more brands