LEGRAND Raritan PX3TS, Руководство пользователя

Страница: 362 / 911

Chapter 7: Using the Web Interface
342
Configuring SMTP Settings
The PX3TS can be configured to send alerts or event messages to a specific
administrator by email. See
Event Rules and Actions (on page 375).
To send emails, you have to configure the SMTP settings and enter an IP
address for your SMTP server and a sender's email address.
If any email messages fail to be sent successfully, the failure event and reason
are available in the event log. See
Viewing or Clearing the Local Event Log (on
page 473).
To set SMTP server settings:
1. Choose Device Settings > Network Services > SMTP Server.
2. Enter the information needed.
Field Description
IP address/host
name Type the name or IP address of the mail server.
Port Type the port number.
▪
Default is 25
Sender email address Type an email address for the sender.
Number of sending
retries Type the number of email retries.
▪
Default is 2 retries
Time between
sending retries Type the interval between email retries in minutes.
▪
Default is 2 minutes.
Server requires
authentication Select this checkbox if your SMTP server requires
password authentication.
User name,
Password
Type a user name and password for authentication
after selecting the above checkbox.
▪
The length of user name and password ranges
between 4 and 64. Case sensitive.
▪
Spaces are not allowed for the user name, but
allowed for the password.
Enable SMTP over
TLS (StartTLS) If your SMTP server supports the Transport Layer
Security (TLS), select this checkbox.
▪
Settings for the CA Certificate:
If the required certificate file is a chain of certificates, and you are not sure
about the requirements of a certificate chain, see
TLS Certificate Chain (on
page 859).