LEGRAND Raritan PX3TS, Руководство пользователя

Страница: 670 / 911

Chapter 9: Using the Command Line Interface
650
config:# role modify <name> addPrivileges
<privilege1>:<argument1>,<argument2>...;
<privilege2>:<argument1>,<argument2>...;
<privilege3>:<argument1>,<argument2>...;
...
Remove specific privileges from a role:
config:# role modify <name> removePrivileges
<privilege1>;<privilege2>;<privilege3>...
If a specific privilege contains any arguments, add a colon and the
argument(s) after that privilege.
config:# role modify <name> removePrivileges
<privilege1>:<argument1>,<argument2>...;
<privilege2>:<argument1>,<argument2>...;
<privilege3>:<argument1>,<argument2>...;
...
Note: When removing privileges from a role, make sure the specified privileges
and arguments (if any) exactly match those assigned to the role. Otherwise, the
command fails to remove specified privileges that are not available.
Variables:
•
<name> is a string comprising up to 32 ASCII printable characters.
•
<description> is a description comprising alphanumeric characters. The
<description> variable must be enclosed in quotes when it contains spaces.
•
<privilege1>, <privilege2>, <privilege3> and the like are names of the
privileges assigned to the role. Separate each privilege with a semi-colon.
See
All Privileges (on page 647).
•
<argument1>, <argument2> and the like are arguments set for a particular
privilege. Separate a privilege and its argument(s) with a colon, and
separate arguments with a comma if there are more than one argument
for a privilege. For arguments syntax, see
All Privileges (on page 647).
Deleting a Role
This command deletes an existing role.
config:# role delete <name>