LEGRAND Raritan PX3TS, Руководство пользователя

Страница: 448 / 911

Chapter 7: Using the Web Interface
428
Placeholder Definition
[PORTTYPE] The type of the external port (e.g. 'feature' or 'auxiliary')
the event-triggering device is connected to
[RADIUSERRORDESC] The Radius error message
[ROMCODE] The romcode of an attached peripheral device
[SENSORREADING] The value of a sensor reading
[SENSORREADINGUNIT] The unit of a sensor reading
[SENSORREPORT] The formatted sensor report contents
[SENSORSTATENAME] The human readable state of a sensor
[SENSORTHRESHOLDNAME] The name of the threshold being crossed
[SENSORTHRESHOLDVALUE] The value of the threshold being crossed
[SERVERPOWEROPERATION] The power control operation that was initiated on a server
(on/off)
[SERVERPOWERRESULT] The result of a power control operation
[SMARTCARDID] The id of a smart card
[SMARTCARDTYPE] The type of a smart card
[SMTPRECIPIENTS] The list of recipients of an outgoing mail
[SMTPSERVER] The name or IP address of an SMTP server
[SYSCONTACT] SNMP MIB-II sysContact field
[SYSLOCATION] SNMP MIB-II sysLocation field
[SYSNAME] SNMP MIB-II sysName field
[TIMEREVENTID] The id of a timer event
[TIMESTAMP]
The timestamp of the event occurrence
[UMTARGETROLE] The target role of a user management operation
[UMTARGETUSER] The target user of a user management operation
[USERIP] The IP address a user connected from
[USERNAME] The user who performed an operation
[VERSION] The firmware version the device is upgrading to
Note: In case you need to type any square brackets "[" and "]" in the custom
message for non-placeholder words, always add a backslash in front of the
square bracket. That is, \[ or \]. Otherwise, the message sent will not display the
square brackets.