LEGRAND Raritan PX3TS, Руководство пользователя

Страница: 606 / 911

Chapter 9: Using the Command Line Interface
586
config:# network dns searchSuffixes <suffix1>,<suffix2>,<suffix3>,...,<suffix6>
Determine which IP address is used when the DNS server returns both
IPv4 and IPv6 addresses:
config:# network dns resolverPreference <resolver>
Variables:
•
<ip address> is the IP address of the DNS server.
•
<suffix1>, <suffix2>, and the like are the DNS suffixes that automatically
apply when searching for any device via PX3TS. For example, <suffix1> can
be
raritan.com , and <suffix2> can be legrand.com . You can specify up to 6
suffixes by separating them with commas.
•
<resolver> is one of the options: preferV4 or preferV6.
Option Description
preferV4 Use the IPv4 addresses returned by the DNS server.
preferV6 Use the IPv6 addresses returned by the DNS server.
Setting LAN Interface Parameters
A LAN interface configuration command begins with network ethernet .
Enabling or Disabling the LAN Interface
This command enables or disables the LAN interface.
config:# network ethernet <ETH> enabled <option>
Variables:
•
<ETH> is one of the options -- eth1 or eth2 .
Option Description
eth1 ETH1 port
eth2 ETH2 port