Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1525/1568
11.8.7
Managing PIM Protocol
11.8.7.1
Configuring Global Configuration
Selection Criteria
PIM Protocol Type
- The protocol variant of PIM that is to be enabled/disabled i.e, Sparse mode or
Dense mode.
Configurable Data
Admin Mode
- Select enable or disable from the pulldown menu to set the administrative status of
PIM-DM in the router. The default is disabled.
Data Threshold Rate (kbps)
- Enter the rate in K bits/second above which the last-hop router
will switch to a source-specific shortest path tree. This field is applicable only for PIMSM. The
valid values are from (0 to 2000). The default value is 0. NOTE: Non-Zero Data Threshold Rate
is currently not supported. Switch on First Packet policy is only supported.
Command Buttons
Submit
- Send the updated configuration to the router. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is
performed.
Refresh
- Refresh the data on the screen with the present state of the data in the switch.
