Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 855/1568
8
IP Multicast Commands
8.1
Distance Vector Multicast Routing Protocol (DVMRP)
Commands
This section provides a detailed explanation of the DVMRP commands. The commands are divided
into the following different groups:
Show commands are used to display device settings, statistics and other information. Configuration
commands are used to configure features and options of the switch. For every configuration
command there is a show command that will display the configuration setting.
8.1.1
Show Commands
8.1.1.1
show ip dvmrp
This command displays the system-wide information for DVMRP.
Syntax
show ip dvmrp
Default Setting
None
Command Mode
Privileged
Exec User
EXEC
Admin Mode This field indicates whether DVMRP is enabled or disabled. This is a configured value.
Display Message
Admin Mode:
Enable or disable DVMRP function.
Version:
This field indicates the version of DVMRP being used.
Total Number of Routes:
This field indicates the number of routes in the DVMRP routing table.
Reachable Routes:
This field indicates the number of entries in the routing table
with non-infinitemetrics. The following fields are displayed for each interface
.
Slot/Port:
Valid slot and port number separated by forward slashes.
Interface Mode:
This field indicates the mode of this interface. Possible values are Enabled and
Disabled.
State:
This field indicates the current state of DVMRP on this interface. Possible values are
Operational or Non-Operational.
