Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1429/1568
11.6.6.4
Configuring Route Redistribution Configuration
This screen can be used to configure the RIP Route Redistribution parameters. The allowable values for
each field are displayed next to the field. If any invalid values are entered, an alert message will be
displayed with the list of all the valid values.
Configurable Data
Available Source
- This select box is a dynamic selector and would be populated by only those
Source Routes that have not previously been configured for redistribution by RIP. This select box
would appear only if the user selects "Create" option as Configured Source. The valid values are
'Static', and 'Connected'.
Metric
- Sets the metric value to be used as the metric of redistributed routes. This field displays the
metric if the source was pre-configured and can be modified. The valid values are (1 to 15)
Distribute List
- Distribute List - Sets the Access List that filters the routes to be redistributed by the
destination protocol. Only permitted routes are redistributed. If this command refers to a non-existent
access list, all routes are permitted. The valid values for Access List IDs are (1 to 199). When used
for route filtering, the only fields in an access list that get used are
Source IP Address and netmask
Destination IP Address and netmask
Action (permit or deny)
All other fields (source and destination port, precedence, tos, etc.) are ignored.
The source IP address is compared to the destination IP address of the route. The source IP
netmask in the access list rule is treated as a wildcard mask, indicating which bits in the source IP
address must match the destination address of the route. (Note that a 1 in the mask indicates a
"don
’t care" in the corresponding address bit.)
When an access list rule includes a destination IP address and netmask (an extended access list),
the destination IP address is compared to the network mask of the destination of the route. The
destination netmask in the access list serves as a wildcard mask, indicating which bits in the route
’s
destination mask are significant for the filtering operation.
Redistribute
- Select to Enable/Disable the route-redistribution for a particular source protocol.By
default this is disable as none of the routes learned through other protocols including connected are
redistributed.
Command Buttons
Submit
- Send the updated configuration to the router. Configuration changes take effect
immediately.
Delete
- Delete the entry of the Source Route selected as Configured Source from the list of Sources
