Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1281/1568
Add a static MAC address
- By default the field is disabled, set the checkbox to add a MAC
address to the list of statically locked MAC addresses for the selected interface.
VLAN ID
- By default the field is disabled, set the checkbox to add corresponding VLAN ID for the
MAC Address being added to the list of statically locked MAC addresses for the selected interface.
Enable violation traps
- Enables or disables the sending of new violation traps designating when a
packet with a disallowed MAC address is received on a locked port.
Enable violation Shutdown
- Enables or disables the Port Security Violation Shutdown mode for
the selected interface.
Maximum Number of Statically Locked MAC Addresses Allowed
- Sets the maximum number of
statically locked MAC addresses on the selected interface. Valid range is (0 to 20).Default value is
20.
Convert dynamically learned address to statically locked
- Apply Button "Move" to convert
dynamic MAC address entries to Static MAC address entries. Shows "Static Limit Reached. No
Dynamic Addresses will be moved." when added Static MAC entries reaches to configured value of
Maximum Number of Statically Locked MAC Addresses Allowed.
Clear Dynamically Learned MAC Addresses
-Clears the Dynamic MAC addresses of the selected
interface.
Command Buttons
Clear
- Clears the Dynamic MAC addresses of the selected interface.
Move
- Convert a dynamically locked MAC address to a statically locked address. The Dynamic
MAC address entries are converted to Static MAC address entries in a numerically ascending order
till the Static limit is reached.
Submit
- Applies the new configuration and causes the changes to take effect. These changes will
not be retained across a power cycle unless a save configuration is performed.
