Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 839/1568
7.12.1.6 show isis neighbor
To display information about Intermediate System-to-Intermediate System (IS-IS) neighbors.
Syntax
show isis neighbor [detail]
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
System Id:
Six-byte value that identifies a system in an area.
Type:
Level type. Indicates whether the IS-IS neighbor is a Level 1, Level-1-2, or Level 2 router.
Interface:
Interface from which the system was learned.
IP Address:
IP address of the neighbor router.
State:
Indicates whether the state of the IS-IS neighbor is up or down.
Holdtime:
Link-state packet (LSP) holdtime. Amount of time that the LSP remains valid (in seconds).
Circuit Id:
Port location for the IS-IS neighbor router that indicates how it is connected to the local
router.
Area Address:
Reachable area addresses from the router. For Level 1 LSPs, these are the area
addresses configured manually on the originating router. For Level 2 LSPs, these are all the area
addresses for the area to which this router belongs.
SNPA:
Subnetwork point of attachment. This is the data-link address.
State Changed:
State Changed.
LAN Priority:
Priority of the LAN.
