Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 901/1568
8.5.2.6
ip pim spt-threshold
Use this command to configure the Data Threshold rate for the last-hop router to switch to the
shortest path. The possible values are 0 or Infinity.
Syntax
ip pim spt-threshold {0 | Infinity}
no ip pim spt-threshold
no -
This command is used to set the Data Threshold rate for the RP router to the default value.
Default Setting
0
Command Mode
Global Config
i
This command takes effect only when PIM-SM is configured as the PIM mode
8.5.2.7
ip pim ssm
Use this command to define the Source Specific Multicast (SSM) range of IP multicast addresses.
Syntax
ip pim ssm {default | <group-address> <group-mask>}
no ip pim ssm {default | <group-address> <group-mask>}
<group-address> -
Specifies the group address.
<group-mask> -
Specifies the group-mask.
no -
This command is used to disable the specified Source Specific Multicast (SSM) range.
Default Setting
Disabled
Command Mode
Global Config
Parameters
default
- Defines the SSM range access list to 232/8.
